our Products

Agricultural Pumps > SS submersible > 6'' SS Submersible Pumps > 14m³/h

About the Product

Point Stainless steel Submersible Pumps are ingeniously designed and developed employing latest engineering softwares, high-tech machinery of pumping technology to deliver the best possible hydraulic efficiency . All these pumps are made of corrosion resistance Stainless steel with Non return valve. These pumps are made by High quality AISI 304 / AISI 316 grade stainless steel.

The 6" Stainless steel Submersible Pumps discharge range from 7m³/hr to 80m³/hr and Head range from 4.5m to 550m. The 6" Stainless steel Submersible Pumps are available with 2", 2½", 3" & 4" Outlet Size.

Point Stainless steel Submersible Pumps are used for Public water supply, Irrigation, Fountains, De-watering, Sprinkler systems, Industrial water supply and Pressure boosting systems.

Features of Point Stainless steel Submersible Pumps: Stainless steel impellers and diffusers to resist corrosion, Built in non-return valve to protect the pump against water hammer, highly efficient, good resistance to sand, Energy efficient hydraulic design for cost effective operation, Easy to install and dismantle for service in the field if necessary .

Pumped Liquids

Non-aggressive, non-explosive, pure, cold, fresh water without abrasives particles having the following characteristics.

Temperature 91.4 F
Chlorine ion density 500 ppm (max.)
Allowable solids 3000 ppm (max.)
Specific gravity 1.004 (max.)
Hardness (Drinking Water) 300 (max.)
Viscosity 1.75x106 m²/sec (max.)
Turbidity 50 ppm silica scale (max.)
pH 6.5 to 8.5
Impellers

Radial flow impellers

4" : PS4S - 1, PS4S - 3 and PS4S - 5
6" : PS6S - 14, PS6S - 18 and PS6S - 22

Mixed flow impellers

4" : PS4S - 14
6" : PS6S - 30, PS6S - 48 and PS6S - 60

Connection

Screwed pipe connection with BSP thread as standard
NPT thread pipe connection are avilable on request

Curve Conditions

The conditions below apply to the curves shown the following pages.

Common

  • Tolerances in accordance with ISO 9906, Annex A.
  • Test Results with clean cold water, without gas content. Measurements have been made with airless water at a temperature of 20oC
  • Head and power values valid for liquids with density p = 1,0 kg/cm3 and kinematic viscosity v = max 1 mm2/s (1cSt)
  • When pumping liquids with a density higher than that of water, motors with correspondingly highter outputs must be used.
  • The QH curves apply to a rated motor speed of 2900 rpm.
  • The performance curves are inclusive of possible losses such as non-return valve losses.
  • A safety margin of +0.5m is recommended for the NPSH range

4" & 6" Curves

  • QH : the curves are inclusive of valve and inlet losses at the actual speed
  • Power curve : the power curve shows pump power input at the actual speed for one stage.
  • Efficiency Curve : n% shows pump stage efficiency.

Operating Conditions

Liquid temperature 0o to + 45oC
Max. sand content into the water 50g/m3
Max. starts per hour 30 at regular intervals
Direction of rotation Clockwise as seen from the pump coupling side.
Impeller / Diffuser

Point PumpsThese pumps are made with SS impeller and Diffuser for high efficiency and less loss. Impellers and Diffusers are avilable with various material grades like AISI 304 / AISI 316.

Shaft

Point PumpsStainless steel pump shafts are designed and made of AISI 304 / AISI 431 grade Stainless steel material.

Non return Valve with body

The integral Non return valve prevents back flow and reduces the risk of water hammer which paves the way for trouble free performance. Non return valve available with various material grades like AISI 304 / AISI 316.

Suction Housing

Point PumpsSuction housing are designed & manufactured in investment casting with various material grades like AISI 304 / AISI 316.

Wearing Ring / Intermediate Bush

Point PumpsThe wearing Ring and Intermediate bush are made with high quality rubber like NBR which has less wear and tear resistance.

Strainer

Strainers are provided in the inlet which prevent the oversized particulars entering inti the pump.

Reliability

Point PumpsReliability is ensured by means of high material standard and process methods. Pump parts are made up of stainless steels. These can withstands high abrasive and corrosive environment. Bush bearing and other rubber components are also designed to withstand sand abration and erosion.

  • Point Pumps
  • Point Pumps
  • Point Pumps
  • Point Pumps
Technology - Pump

The technology of submersible pumps are multistage single suction centrifugal type and provided with integral check valve which can be coupled to a submersible electric motors. The submersible pumps are designed and manufactured to provide smooth and easy installation.

Point submersible pumps can be offered with either Point water filled submersible motors or other NEMA standard motors.

The pump is checked during each stage of the assembly process up to the final stage, where in every pump is checked for flow, pressure, power consumption and leaks.

Material Options

The submersible pumps are available in stainless steel AISI 304 and AISI 316 grade in 4" and 6" submersible pumps.

Pump shaft AISI 304 & AISI 431
Diffuser casing AISI 304 / AISI 316
Impeller AISI 304 / AISI 316
Efficiency

To make a positive impact in the pump efficiency level effective measures have been taken in designing every component. Superior manufacturing methods are adopted to achieve higher efficiencies.

Durability

The best material, high quality manufacturing methods and rigorous safety tests are conducted to ensure superior strength and durability of each product range.

  • Point Pumps
  • Point Pumps
  • Point Pumps
  • Point Pumps
Cross Sectional View
  • Point Pumps
  • Point Pumps
Dimensional Drawing and Details
PUMP MODEL REQUIRED MOTOR POWER No. Of cable guard DIMENSIONS (mm) APPROX NETT. WEIGHT (KG)
KW HP OD RP H2
PS6S-14/05 3 4 1 139 50/65 484 11.3
PS6S-14/06 3 4 1 139 50/65 523 12.0
PS6S-14/07 3.7 5 1 139 50/65 562 13.0
PS6S-14/08 4 5.5 1 139 50/65 601 13.8
PS6S-14/09 4.5 6 1 139 50/65 640 14.8
PS6S-14/10 4.5 6 1/2 139/143 50/65 679 15.7
PS6S-14/11 5.5 7.5 1/2 139/143 50/65 718 16.7
PS6S-14/12 5.5 7.5 1/2 139/143 50/65 757 17.6
PS6S-14/13 5.5 7.5 1/2 139/143 50/65 796 18.6
PS6S-14/14 7.5 10 1/2 139/143 50/65 835 19.5
PS6S-14/15 7.5 10 1/2 139/143 50/65 874 20.4
PS6S-14/16 7.5 10 1/2 139/143 50/65 913 21.2
PS6S-14/17 7.5 10 1/2 139/143 50/65 952 22.1
PS6S-14/18 9.3 12.5 1/2 139/143 50/65 991 23.1
PS6S-14/19 9.3 12.5 1/2 139/143 50/65 1030 24.0
PS6S-14/20 9.3 12.5 1/2 139/143 50/65 1069 25.0
PS6S-14/21 9.3 12.5 1/2 139/143 50/65 1108 25.9
PS6S-14/22 11 15 1/2 139/143 50/65 1147 26.9
PS6S-14/23 11 15 1/2 139/143 50/65 1186 27.8
PS6S-14/24 11 15 1/2 139/143 50/65 1225 28.8
PS6S-14/25 11 15 1/2 139/143 50/65 1264 30.0
PS6S-14/26 11 15 1/2 139/143 50/65 1303 30.8
PS6S-14/27 13 17.5 1/2 139/143 50/65 1342 31.8
PS6S-14/28 13 17.5 1/2 139/143 50/65 1381 32.8
PS6S-14/29 13 17.5 1/2 139/143 50/65 1420 33.7
PS6S-14/30 13 17.5 1/2 139/143 50/65 1459 34.6
PS6S-14/31 15 20 1/2 139/143 50/65 1500 35.6
PS6S-14/32 15 20 1/2 139/143 50/65 1537 36.7
PS6S-14/33 15 20 1/2 139/143 50/65 1576 38.0
PS6S-14/34 15 20 1/2 139/143 50/65 1615 39.0
PS6S-14/35 15 20 1/2 139/143 50/65 1654 40.0
PS6S-14/36 18.5 25 1/2 139/143 50/65 1693 41.1
PS6S-14/37 18.5 25 1/2 139/143 50/65 1732 42.1
PS6S-14/38 18.5 25 1/2 139/143 50/65 1771 43.1
PS6S-14/39 18.5 25 1/2 139/143 50/65 1810 44.0
PS6S-14/40 18.5 25 1/2 139/143 50/65 1849 45.3
PS6S-14/41 18.5 25 1/2 139/143 50/65 1888 46.2
PS6S-14/42 18.5 25 1/2 139/143 50/65 1927 47.2
PS6S-14/43 22 30 1/2 139/143 50/65 1966 48.1
PS6S-14/44 22 30 1/2 139/143 50/65 2005 49.1
PS6S-14/45 22 30 1/2 139/143 50/65 2044 50.0
PS6S-14/46 22 30 1/2 139/143 50/65 2083 51.2
PS6S-14/47 22 30 1/2 139/143 50/65 2122 51.9
PS6S-14/48 22 30 1/2 139/143 50/65 2161 52.9
PS6S-14/49 22 30 1/2 139/143 50/65 2200 53.8
PS6S-14/50 22 30 1/2 139/143 50/65 2239 54.8
Performance Curves
Performance Table
PUMP MODEL MOTOR KW Ips 0 1.66 2.22 2.78 3.33 3.89 4.44 5.00
m3/h 0 6.0 8.0 10.0 12.0 14.0 16.0 18.0
PS6S-14/05 3 TOTAL MANOMETRIC HEAD IN METRES- (COLUMN WATER) 59 52 50 46 42 35 26 17
PS6S-14/06 3 70 64 60 56 52 44 33 22
PS6S-14/07 3.7 82 74 71 67 60 52 40 28
PS6S-14/08 4 94 84 80 75 68 59 45 31
PS6S-14/09 4.5 104 93 90 84 77 66 50 33
PS6S-14/10 4.5 118 104 100 94 85 72 56 36
PS6S-14/11 5.5 130 115 108 102 92 79 60 38
PS6S-14/12 5.5 140 123 116 109 99 84 64 42
PS6S-14/13 5.5 150 130 124 116 107 88 68 46
PS6S-14/14 7.5 160 142 135 127 116 99 78 53
PS6S-14/15 7.5 172 153 146 137 127 109 87 60
PS6S-14/16 7.5 184 164 156 147 135 116 92 64
PS6S-14/17 7.5 196 174 166 156 143 123 96 67
PS6S-14/18 9.3 204 184 176 166 150 128 100 71
PS6S-14/19 9.3 218 189 184 172 156 135 107 75
PS6S-14/20 9.3 228 202 191 179 163 140 112 79
PS6S-14/21 9.3 240 209 197 184 168 147 116 83
PS6S-14/22 11 254 219 205 192 176 153 121 90
PS6S-14/23 11 262 236 217 204 186 163 129 96
PS6S-14/24 11 280 244 232 217 199 172 136 96
PS6S-14/25 11 290 257 244 230 211 183 144 100
PS6S-14/26 11 302 267 254 239 220 190 150 104
PS6S-14/27 13 318 278 265 248 228 197 156 110
PS6S-14/28 13 324 290 276 260 237 204 161 116
PS6S-14/29 13 338 300 285 268 244 212 168 118
PS6S-14/30 13 350 308 292 275 252 218 172 120
PS6S-14/31 15 360 320 304 284 260 227 180 127
PS6S-14/32 15 374 332 316 296 272 236 189 132
Performance Curves
Performance Table
PUMP MODEL MOTOR KW Ips 0 1.66 2.22 2.78 3.33 3.89 4.44 5.00
m3/h 0 6.0 8.0 10.0 12.0 14.0 16.0 18.0
PS6S-14/33 15 TOTAL MANOMETRIC HEAD IN METRES- (COLUMN WATER) 384 343 330 310 282 242 192 138
PS6S-14/34 15 396 356 340 320 292 251 200 145
PS6S-14/35 15 408 367 349 329 300 259 208 154
PS6S-14/36 18.5 420 376 359 337 308 267 216 160
PS6S-14/37 18.5 430 385 368 347 316 275 222 167
PS6S-14/38 18.5 440 395 376 355 324 281 229 172
PS6S-14/39 18.5 454 404 386 363 332 289 237 180
PS6S-14/40 18.5 464 412 395 372 340 298 244 188
PS6S-14/41 18.5 476 422 404 382 348 305 253 195
PS6S-14/42 18.5 488 432 413 391 359 313 260 203
PS6S-14/43 22 500 443 424 400 368 320 268 212
PS6S-14/44 22 510 453 434 411 376 329 276 220
PS6S-14/45 22 520 464 444 420 386 340 284 230
PS6S-14/46 22 528 474 455 432 396 348 292 238
PS6S-14/47 22 538 483 463 440 405 358 302 244
PS6S-14/48 22 550 491 471 448 416 368 312 252
PS6S-14/49 22 560 501 481 458 424 380 322 260
PS6S-14/50 22 566 512 491 468 435 389 333 268

Refer General Information for performance curve conditions and for other details.
Curve tolerance according to ISO : 9906, Annex - A.