Waste Management

Macerator > PMI Series

Have Question?

PMI Series are designed for installation in the piping. This unit must be installed vertically. In this, the motor is directly attached to macerator chamber to form a single unit. Inside the Macerator, the impeller with replaceable cutting edges, rotates inside the stationary cutting ring, which macerate the particles to smaller size. For this model either the helical pump or progressive cavity pump must be installed to suck the solids through the macerator and pump them into the plant for further treatment.

Flange positionsSuction & Delivery Flange :  Opposite, inline and same DimensionFlange DesignConnection dimensions as per DIN Standard

Cross Sectional View

Permissible Internal Pressure : 10 bar  Permissible Negative Pressure : 0.5 bar  Permissible Medium Temperature : 80°C
Sl.No.Macerator typeInlet dia (mm)Outlet dia (mm)Cutting ring dia(mm)Max. throughput at 3% dry. substance (m 3/h)Speed (rpm)Drive capacity(kW/HP)Delivery head(m)Weight (kg) Approx
1PMI 101251252001015004/5.53190
2PMI 201251252002015005.5/7.5195
3PMI 401501503004010007.5/10330
4PMI 8015015030080100011/15340
 The stated performance data are to be understood only as an outline of performance of our products.

Macerator typeUnit DimensionsExtension MeasurementExternal sealing
PMI 1019084334250131050047038027722826022300M16
PMI 2019084334250131050047038027722826022300M16
PMI 40210104437567031070047048037732536022400M16
PMI 80210104437567031070047048037732536022400M16

Macerator typeconnection dimensions according to DIN 2501, PN 10
PN1 PN2DPfk1g1No.of holes
PMI 1012525426210188
PMI 2012525426210188
PMI 4015028526240228
PMI 8015028526240228
* All Dimensions are in mm* Dimensions shown are for guidance and planning purpose only

Contact us

Get in touch for enquiries and offers.